Tuesday, March 07, 2006

 

Converting an ABR to a ABR+ASBR. (Question #30)

Consider a router running OSPF that is an ABR. The configuration for the OSPF router process on this router is

router ospf 100
router-id 1.1.1.1
log-adjacency-changes
network 1.1.1.0 0.0.0.255 area 0
network 10.10.10.0 0.0.0.255 area 0
network 30.30.30.0 0.0.0.255 area 1

There are no other dynamic routing protocols running on the box. The output of show ip ospf indicates that this is an ABR. Can you type just one additional command under the router ospf process in the configuration to cause show ip ospf to report this system as an ASBR in addition to being an ABR?

This page is powered by Blogger. Isn't yours?